I am trying to use sip to send fax, I think I need to tell the virtual line not to check for dialtone.

Please let me know if you can help.

Regards
JK
[root@elastix138 log]# cat c000000058
Oct 12 02:25:39.17: [ 5507]: SESSION BEGIN 000000058 13054917140
Oct 12 02:25:39.17: [ 5507]: HylaFAX (tm) Version 4.3.9
Oct 12 02:25:39.17: [ 5507]: SEND FAX: JOB 29 DEST 13054917140 COMMID 000000058 DEVICE '/dev/ttyIAX1' FROM 'root <fax@it-solutionsusa.com>' USER root
Oct 12 02:25:39.17: [ 5507]: STATE CHANGE: RUNNING -> SENDING
Oct 12 02:25:39.17: [ 5507]: <-- [12:AT+FCLASS=1\r]
Oct 12 02:25:39.17: [ 5507]: --> [2:OK]
Oct 12 02:25:39.17: [ 5507]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Oct 12 02:25:39.17: [ 5507]: DIAL 13054917140
Oct 12 02:25:39.17: [ 5507]: <-- [16:ATDT13054917140\r]
Oct 12 02:25:39.18: [ 5507]: --> [11:NO DIALTONE]
Oct 12 02:25:39.22: [ 5507]: SEND FAILED: JOB 29 DEST 13054917140 ERR No local dialtone
Oct 12 02:25:39.22: [ 5507]: <-- [5:ATH0\r]
Oct 12 02:25:39.22: [ 5507]: --> [2:OK]
Oct 12 02:25:39.22: [ 5507]: MODEM set DTR OFF
Oct 12 02:25:39.22: [ 5507]: MODEM set baud rate: 0 baud (flow control unchanged)
Oct 12 02:25:39.22: [ 5507]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Oct 12 02:25:39.22: [ 5507]: SESSION END

**************************
[root@elastix138 asterisk]# vi /etc/asterisk/iax_general_custom.conf
calltokenoptional = 0.0.0.0/0.0.0.0
maxcallnumbers = 16382
~

**********************************************************
[20000]
deny=0.0.0.0/0.0.0.0
secret=XXXXXXXX
transfer=no
context=from-internal
host=dynamic
type=friend
port=4569
qualify=yes
dial=IAX2/20000
accountcode=
mailbox=20000@device
permit=0.0.0.0/0.0.0.0
callerid=device <20000>
setvar=REALCALLERIDNUM=20000
*******************************
root@elastix138 bin]# cd /var/spool/hylafax/status
[root@elastix138 status]# ls
ttyIAX1 ttyIAX2 ttyIAX3
[root@elastix138 status]# ttyIAX1
-bash: ttyIAX1: command not found
[root@elastix138 status]# ttyIAX1 status
-bash: ttyIAX1: command not found
[root@elastix138 status]# ./ttyIAX1 status
-bash: ./ttyIAX1: Permission denied
[root@elastix138 status]# cd /ttyIAX1
-bash: cd: /ttyIAX1: No such file or directory
[root@elastix138 status]# ttyIAX1






***********************
/var/spool/hylafax/config
[root@elastix138 config]# cat hayes
# $Id$
#
# Configuration for Hayes Optima 336B
#
# It is very similar to other RC288DPI modems (it uses that chipset), but
# does not follow the quirky bit order as well as having an intolerance
# for the "<19200><xon>" answer signal.
#
# CONFIG: CLASS2: *-"OPTIMA 33600"-*
#
# BEGIN-SERVER
# END-SERVER
#
ModemType: Class2
ModemRate: 19200
ModemFlowControl: rtscts
#
ModemNoFlowCmd: AT&K0
ModemSoftFlowCmd: AT&K4
ModemHardFlowCmd: AT&K3
ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset
ModemSetupDCDCmd: AT&C1 # DCD follows carrier
ModemSetupAACmd: AT+FAA=1 # enable adaptive-answer in Class 2
#
ModemDialCmd: ATDT%s
#
Class2RecvDataTrigger: "\022" # character sent to modem to start recv
Class2BUGCmd: none # prevent init ERROR
Class2APQueryCmd: none # prevent init ERROR
[root@elastix138 config]#
***********************************

Kernel
Linux(x86_64)-2.6.18-194.3.1.el5

Elastix
elastix-2.0.0-57
elastix-asterisk-sounds-1.2.3-1
elastix-firstboot-2.0.0-14
elastix-email_admin-2.0.0-23
elastix-system-2.0.0-38
elastix-vtigercrm-5.1.0-8
elastix-agenda-2.0.0-24
elastix-fax-2.0.0-18
elastix-reports-2.0.0-20
elastix-a2billing-1.3.0-4
elastix-addons-2.0.0-19
elastix-pbx-2.0.0-40

RounCubeMail
RoundCubeMail-0.3.1-5

Mail
postfix-2.3.3-2.1.el5_2
cyrus-imapd-2.3.7-7.el5_4.3

IM
openfire-3.5.1-3

FreePBX
freePBX-2.7.0-9

Asterisk
asterisk-1.6.2.13-0
asterisk-perl-0.10-2
asterisk-addons-1.6.2.1-0

FAX
hylafax-4.3.9-0rhel5
iaxmodem-1.2.0-1.1

DRIVERS
dahdi-2.3.0.1-3
rhino-0.99.3-2.beta2
wanpipe-util-3.5.14-0