Elastix 1.6.2-7
Asterisk 1.4.33.1
HulaFax 4.3.9

Receiving part is OK. When sending using YajHFC client, get error "No answer from remote".

# cat /var/log/iaxmodem/iaxmodem-cfg.ttyIAX1
[2010-10-28 17:06:50] Registration failed.
[2010-10-28 17:11:45] Registration failed.
[2010-10-28 17:12:14] Don't know what to do with IAX event 15.
[2010-10-28 17:16:40] Registration failed.
[2010-10-28 17:18:10] Don't know what to do with IAX event 15.
[2010-10-28 17:21:35] Registration failed.

#cat /var/spool/hylafax/log/c000000020
Oct 28 17:12:14.45: [21279]: SESSION BEGIN 000000020 1XXXXXXXXXX
Oct 28 17:12:14.45: [21279]: HylaFAX (tm) Version 4.3.9
Oct 28 17:12:14.45: [21279]: SEND FAX: JOB 6 DEST XXXXXXX COMMID 000000020 DEVICE '/dev/ttyIAX1' FROM '899 <johnny@localhost>' USER 899
Oct 28 17:12:14.45: [21279]: STATE CHANGE: RUNNING -> SENDING
Oct 28 17:12:14.45: [21279]: <-- [12:AT+FCLASS=1\r]
Oct 28 17:12:14.45: [21279]: --> [2:OK]
Oct 28 17:12:14.61: [21279]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Oct 28 17:12:14.67: [21279]: DIAL XXXXXXX
Oct 28 17:12:14.67: [21279]: <-- [12:ATDTXXXXXXX\r]
Oct 28 17:12:59.67: [21279]: --> [9:NO ANSWER]
Oct 28 17:12:59.67: [21279]: SEND FAILED: JOB 6 DEST XXXXXXX ERR No answer from remote
Oct 28 17:12:59.67: [21279]: <-- [5:ATH0\r]
Oct 28 17:12:59.67: [21279]: --> [2:OK]
Oct 28 17:12:59.67: [21279]: MODEM set DTR OFF
Oct 28 17:12:59.67: [21279]: MODEM set baud rate: 0 baud (flow control unchanged)
Oct 28 17:12:59.67: [21279]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Oct 28 17:12:59.67: [21279]: SESSION END

Any assistance is greatly appreciated.

Nobody has ideas?

have you tried different outbound routes?

Make you iaxmodem register 1st. Add other IAX setting in freeepbx:
calltokenoptional=127.0.0.1/255.255.255.0

icbnsys

Hi,
I have the same problem in Elastix 2.0 and 2.2 RC3.
I tried with calltokenoptional but sending fax still doesn't work.
Anybody can tell me how to solve it?